DOEPFER A-100CGK User's Guide Page 1

DOEPFERCV/Gate-KeyboardCV/Gate-KeyboardCV/Gate-KeyboardCV/Gate-KeyboardA-100CGKA-100CGKA-100CGKA-100CGKUser’s Guidewww.doepfer.com

Configuration Mode: Adjustment of basic parametersRemark: If you have ordered the A-100CGK with metal case and 4 octaveskeyboard, and want to use it i

If the jumper is removed the gate output has S-Trig or switching trigger function, i.e.the gate terminal is connected to GND (instead of a voltage out

© 2008 byDoepfer Musikelektronik GmbHGeigerstr. 1382166 GraefelfingGermanyPhone: #49 89 89809510Fax: #49 89 89809511Web Site: www.doepfer.deEmail: sal

OPERATING AND SAFETY INSTRUCTIONSPlease follow the given instructions for use of the instrument because this willguarantee correct instrument operatio

IntroductionThe A-100CGK is a monophonic keyboard with CV and Gate outputs. The mainapplication is the control of an A-100 system but even other modul

• available menus/buttons with LEDso Mode: selects the key for CV1 when more than one key is operated ar thesame time lowest key priority highes

ConnectionsA-100CGK Rear viewnnnn 9V DC (power supply)A-100CGK does not have a built-in power supply. Instead it uses a plug-in typeexternal power sup

qqqq A-100 ConnectorThis 9 pin sub-D connector can be used to establish the connection between the A-100CGK and an A-100 system with one cable only by

tttt CV2This 3,5 mm jack socket is the control voltage output of the A-100CGK that iscontrolled by the velocity of the key pressed on the keyboard. Th

OperationA-100CGK is switched on by plugging the AC adapter into a wall outlet andconnecting it to the appropriate power supply socket n. There is no

These menus are available:MODEThis menu is used to select the assign mode, i.e. the rule which key is used togenerate the control voltage CV1 if two o