Doepfer A-199 Spring Reverb User Manual

Browse online or download User Manual for Audio Doepfer A-199 Spring Reverb. Doepfer A-199 Spring Reverb User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
doepfer
System A - 100
Spring Reverb
A-199
1
1. Introduction
Module A-199 is a spring reverb module that simula-
tes the reverb effect by means of 3 spiral springs. The
3-spring system
used in the A-199 ensures a "dense"
reverb because of the different properties of the three
springs. The A-199 implies some special features that
are not self-evident for spring reverb units:
The reverb signal can be fed back to the input using
the Feedback
control. Even self-oscillation of the
springs similiar to the self-oscillation of filters is avai-
lable. The feedback loop can lead even via external
modules like VCA, VCF, phaser, frequency shifter, vo-
coder, distortion/waveshaper, ring modulator and
others.
Another feature is the Emphasis
control. This enables
the adjustment of the accentuation of middle frequen-
cies (around ~ 2kHz).
With the Mix
control the relation between original and
reverb signal appearing at the mix output is adjusted.
Using all these features very extreme and unusual ef-
fects can be generated with the A-199.
Leve l
Level
Emphasis
ext.
Feedb.
In
A-199
SPRV
Mix
Reverb
Out
Mix
Out
Feedback
Pay attention to the power supply recommendation at
the end of this manual (page 6) if you are about to
plan an A-100 system that includes an A-199.
Page view 0
1 2 3 4 5 6

Summary of Contents

Page 1 - 1. Introduction

doepferSystem A - 100Spring Reverb A-19911. IntroductionModule A-199 is a spring reverb module that simula-tes the reverb effect by means of 3 spir

Page 2 - 2. Overview

A-199 Spring ReverbSystem A - 100doepfer22. OverviewControls:1 Level : Attenuator for the the audioinput signal at input !2 Feedback : Manual feed

Page 3 - 300 Hz 1.0 kHz 10 kHz

doepferSystem A - 100Spring Reverb A-19933. Controls1 LevelAttenuator 1 controls the level of the input signal fedinto socket !.2 FeedbackKnob 2 co

Page 4 - 5. User examples

A-199 Spring ReverbSystem A - 100doepfer44. In- / Outputs! Audio InThe audio signal to be provided with the reverb effectis fed into audio input !.

Page 5 - Spring Reverb

doepferSystem A - 100Spring Reverb A-1995Fig. 2: Frequency-selective reverbAnother field of activity results from the external feed-back feature (s

Page 6

A-199 Spring ReverbSystem A - 100doepfer67. Position and assembly of the reverbsystem / Power supply recommendationThe reverb system used in the A-

Comments to this Manuals

No comments