Doepfer A-167 Analog Comparator / Offset Generator / Subtr User Manual

Browse online or download User Manual for Audio Doepfer A-167 Analog Comparator / Offset Generator / Subtr. Doepfer A-167 Analog Comparator / Offset Generator / Subtractor User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
doepfer
System A - 100
CMP
A-167
1
1. Introduction
Module A-167 compares analog voltages and deri-
ves a gate signal. The state of the gate output (low/
high) depends upon which of the voltages is higher.
It is possible to compare two external voltages (+In
and -In) or an external voltage (+In or -In) with a
manually adjustable value (Offset control). Both ana-
log inputs +In and -In are equipped with an attenuator.
A LED shows the current state of the gate output.
The Gap control is used to adjust a so-called
"hysteresis". As long as this control is set to zero the
switching levels for both on and off state of the gate
signal are identical. As soon as the Gap control is
turned up the switching levels for on and off state fall
apart and a so-called hysteresis appears.
Normal and inverted gate outputs are available.
In addition the internal voltage a1*(+In) - a2*(-In) +
Offset is available at the Analog Sum socket. Conse-
quently the module can be used as subtractor and
offset generator too.
A-167
Comparator
+ In
Comp. Out
Offset
+ In
- In
- In
Analog
Sum
Inv. Comp. Out
Gap
Page view 0
1 2 3 4 5 6

Summary of Contents

Page 1 - 1. Introduction

doepferSystem A - 100CMP A-16711. IntroductionModule A-167 compares analog voltages and deri-ves a gate signal. The state of the gate output (low/

Page 2 - 2. Overview

A-167 CMPSystem A - 100doepfer22. OverviewControls:1 + IN : Attenuator for voltage at input !2 - IN : Attenuator for voltage at input "3

Page 3 - 3. Basic principle

doepferSystem A - 100CMP A-16733. Basic principleThe module generates internally the voltage USUM:USUM = a1 • In+ - a2 • In- + OffsetThe factors a

Page 4 - 4. Controls

A-167 CMPSystem A - 100doepfer44. Controls1 + In • 2 - InThe controls 1 and 2 are the attenuators for thevoltages fed to the sockets ! r

Page 5 - § Analog Sum

doepferSystem A - 100CMP A-16755. In - / Outputs! + INThe input signal fed into this socket is attenuated withcontrol 1 and added to the internal

Page 6 - Gate Control

A-167 CMPSystem A - 100doepfer6The module can even be used to add the free-runningmode to each ADSR (e.g. A-140 or A-141) similar to aLFO but with

Comments to this Manuals

No comments