Doepfer A-122 24dB Low Pass 2 User Manual

Browse online or download User Manual for Audio Doepfer A-122 24dB Low Pass 2. Doepfer A-122 24dB Low Pass 2 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
doepfer
System A - 100 A-105 / A-122
1
1. Introduction
The modules A-105 and A-122 are voltage-
controlled low-pass filters, which filter out the higher
parts of the sound spectrum, and lets lower frequen-
cies pass through.
The
cut-off frequency
determines the point at which
filtering takes effect. You can control this manually, or
by voltage control (
filter modulation
, for instance by
an LFO). Two CV inputs are available. The cut-off
slope is
-24 dB/octave
.
Voltage controlled resonance: for both A-105 and
A-122, resonance can be controlled not just manually,
but by voltages as well, right up to self-oscillation. In
this case, the filter behaves like a sine wave oscillator.
The A-105 is based on the special circuit SSM2044,
that was used in several devices of the companies
Korg (Polysix, Mono-Poly), Sequential Circuits
(Prophets, Pro-One), PPG, Fairlight, Emu and Kawai.
The circuitry of the A-122 uses a chip of Curtis Elec-
tromusic (CEM), and is very similar to the classic
Oberheim filter sound. Because of the different cir-
cuits the A-105 and A-122 have considerably different
sounds and even sound different compared to the
other filters (e.g. A-120 Moog low pass, A-102 Diode
Low Pass or A-103 18dB low pass, A-124 Wasp filter).
As the functions and controls are the same for both
modules they are a combined in one manual.
FCV 1
Resonance
FCV 2
QCV
Audio
In
Level
Audio
Out
QCV
Frequency
A-122
VCF 3
FCV 2
Page view 0
1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - 1. Introduction

doepferSystem A - 100 A-105 / A-12211. IntroductionThe modules A-105 and A-122 are voltage-controlled low-pass filters, which filter out the highe

Page 2 - A-122

A-105 / A-122 System A - 100doepfer22. VCF 3 - OverviewControls:1 Lev. : Attenuator for audio input !2 Frq. : Cut-off frequency control3 FCV : At

Page 3 - 3. Controls

doepferSystem A - 100 A-105 / A-12233. Controls1 Lev.Use this attenuator to control the amount of signalentering the filter input $.H If the filter

Page 4 - " FCV 1

A-105 / A-122 System A - 100doepfer4At close to maximum resonance, the filter starts toself-oscillate, and behaves like a sine wave oscilla-tor. Th

Page 5 - 5. User examples

doepferSystem A - 100 A-105 / A-1225$ QCVThis socket is the voltage control input for the filter’sresonance.If you patch a modulation source (eg LFO,

Page 6

A-105 / A-122 System A - 100doepfer6A-121 multi-mode filter’s 12 dB) with voltage control-led resonance.To create a bandpass filter, put both modules

Page 7

doepferSystem A - 100 A-105 / A-1227Further examples can be found in the manual for theA-123 high pass filter.

Page 8 - Audio Out

A-105 / A-122 System A - 100doepfer86. Patch-SheetThe following diagrams of the module can helpyou recall your own Patches. They’re designed sothat

Related models: A-105 24dB SSM Low Pass

Comments to this Manuals

No comments